How to use a manual flash gun

 · When you use manual flash, you set your flash power and it will then use that same power for every exposure. But then, another user will .  · So if we are using our flash at full power, at say 10 ft from our subject, then we have to use an aperture of / 10 which gives us an aperture of f/ The spec for the Canon EX-RT speedlite is given as: Guide Number: ′ (60 m) at ISO for the flash-head zoomed to mm.  · So the steps are straightforward: Find your composition Get your ambient exposure correct through your F stop and shutter speed settings. Set your flash to manual mode and set the power to 1/1 Use a colored gel to alter the color of the flash if desired If you have a flash meter you can use it to Reviews: 2.

Pros and cons of manual flash. In situations where the distance between the flash and the subject is constant and fixed, you can opt to use manual flash settings. A manual flash is extremely useful in situations where you have to fire away a series of shots of the subject repeatedly, under similar exposure conditions. Let's understand the difference between TTL and Manual Flash: TTL - The flash takes a reading and makes its best guess. The flash fires a pre-flash, which takes a measurement of the light reading, and then fires the flash at the power level that it thinks will properly expose the image. The biggest pro is that it's automated and does the. Set the ISO on your flash to 1/2 the box speed of your film stock. Remember, the angle of coverage on speedlights is made for 35mm cameras, so you will need to do a little mental math when you're shooting medium format. Here's an example: You are using a Contax with an 80mm lens. Instead of setting your angle of coverage to 80, set it to

With manual flash, you have to adjust any of those settings to balance them out for correct flash exposure. You can use a light-meter, or even use the histogram to get correct flash exposure. With TTL flash, the camera and flash control the flash output (i.e., the power) as you adjust any of the other settings. So the steps are straightforward: Find your composition Get your ambient exposure correct through your F stop and shutter speed settings. Set your flash to manual mode and set the power to 1/1 Use a colored gel to alter the color of the flash if desired If you have a flash meter you can use it to. When you use manual flash, you set your flash power and it will then use that same power for every exposure. But then, another user will chime in and say “TTL is the only way to go.”.